NNAL

Articles in this section

Connect AlarmFOBs with Stop Function

Avatar
Cecilie P
  • Updated
Follow

CONNECTING MULTIPLE FOBS WITH STOP FUNCTION

 

Silhuette-Stop-FOB-Black.png

 

How to connect any of the ALARM FOBs with STOP function. In the event that one (or more) of the ALARM FOBs with STOP function goes overboard, it will trigger automatic engine shut down.
Manual button press on an ALARM FOB connected with STOP function (disconnect) will shut down the engine(s).

 

Pairing-Press-xFOB-Simple.png

CONNECT THE FIRST FOB

Click the button on your xFOB to connect.
ConState_0003_Form-1.png

STOP FOB CONNECTED

When connecting the first xFOB it becomes the STOP FOB. The STOP FOB will automatically shut down the engine(s) if the pilot falls overboard and disconnect the all FOBs.

Morse-Buzzer-connected.png
Press-xHUB-3sek.png

ACTIVATE STOPFUNCTION FOR THE NEXT CONNECTING ALARM FOB CONNECTED

Press and hold the button on the xHUB for 3 seconds to activate STOP function on the next connecting ALARM FOB. The xHUB lights shifts between green and blue.

Morse-Alarm-to-stop.png
Pairing-Press-xFOB-Simple.png

CONNECT ALARM FOB WITH STOP FUNCTION

Immediately after releasing the button on the xHUB, click the button on the next xFOB to be connected as ALARM FOB with STOP function.

Morse-Buzzer-connected.png
Discon-2-3-4.png

Repeat-symbol.png

Repeat step 2.1 and 2.2 to connect successive ALARM FOBs with STOP function
Pairing-Press-xFOB-Simple.png

DISCONNECT

Click the button on your xFOB to disconnect.
Red-xHUB-Light.png

Disconnecting STOP FOB or ALARM FOB with STOP function

Disconnecting the STOP FOB or ALARM FOB with STOP function will shut down the engine(s) and disconnect all FOBs regardless of their connected state.

Morse-Buzzer-disconnect-stop-FOB.png

 

NOTE:

Any combination of ALARM FOBs with or without STOP function can be connected.
E.g. Connect a new ALARM FOB with only ALARM functionality by one click on the ALARM FOB, going directly to step 2.2. without first performing step 2.1. above, after a previous ALARM FOB with STOP function has been connected.

WARNING:
If the STOP FOB or any of the connected ALARM FOBs with STOP function goes overboard, the xHUB will shut down the engine(s), disconnect all connected FOBs and go into MOB mode. Anyone left on board can restart the engine as normal after 6 seconds without having to reconnect any FOBs or interact with the MOB+ system.

 

Keywords:

multiple FOBs, alarm FOB stop, additional FOB, STOP function on all FOBs, green and blue light, connect Alarm FOB