Introduction

Purpose and scope of the manual

This document is a guide for the safe and effective configuration and use of the WaterSensor+ Cover.

Product introduction

The WaterSensor+ Cover enables flexible mounting of the WaterSensor+ inside any vessel. The cover protects the sensor from accidental impacts and shocks. The bracket has screw holes for wall mounting, as well as double-sided tape for alternative mounting on surfaces where drilling is not desired, such as boat hulls.

Product overview

Functional elements

1. Cover
2. Bracket
3. Tape
4. Screws - NOT INCLUDED

Accessories

N/A

Functionality

WaterSensor protection: Protect the WaterSensor+ from external damage and fix the item in the vessel.

Dimensions

Colors

WaterSensor+ Cover comes in a neutral white colour. 

Installation

The WaterSensor+ can be placed freestanding or mounted on the hull, helm or other location in the boat that requires water detection. The bracket provides flexibility to strategically place the sensor in locations where humidity measurement is critical for health and building integrity.

1. Clean the mounting surface and remove the 4x tape covers before mounting the bracket.
   
   
   
   or
   
   Mount using screws suitable for the surface, minimum 2x (max. Ø3 mm). Do not overtighten, as this will damage the bracket.
   
   
   
   
2. Place the WaterSensor+ in the bracket, and mount the cover on top.
   
   
   
   
3. Turn the cover in the direction of the arrow to lock.You will hear and feel a "click" when the cover is in place. Unlock the cover by turning in the opposite direction.
   
   

Specifications

General

Maintenance, cleaning and transportation

Maintenance 

The product does not require ongoing maintenance, with the exception of cleaning.

Cleaning

To clean your WaterSensor+ Cover, wipe it with a soft cloth moistened with mild detergent. Avoid using abrasive cleaners or chemical solvents that contain oil or alcohol, as this can discolor the plastic. Use another soft, dry cloth to wipe it dry.

Transport

The WaterSensor+ Cover should always be transported in its original packaging. If the packaging should fall or be affected in any other way, a visual inspection should be performed to confirm possible damage to the product.

Storage

To preserve the packaging and its contents, we recommend storage in a tempered, dry and well-ventilated area. Relative humidity should not exceed 80% and no corrosive gas should be present. Storage or transportation environment must never exceed the limits provided in the technical specifications of the WaterSensor+.

Legal information

Brands

Fell Marine is a registered trademark with Fell Technology AS.

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries.

Google Play and the Google Play logo are trademarks of Google LLC.

License Rights and Restrictions

NO RIGHTS OR LICENSES, EXPRESS OR IMPLIED, ARE GRANTED TO USE THIRD-PARTY DEVICES IN COMBINATION WITH THESE PRODUCTS IN A WIRED OR WIRELESS NETWORK, OR TO USE THIRD-PARTY SERVICES TO ACCESS, MONITOR, OR CONTROL THESE PRODUCTS ON A WIRED OR WIRELESS NETWORK OVER THE INTERNET OR OTHER NETWORK.

Manufacturer

Fell Technology AS

Bragernes Torg 2

NO-3017 Drammen

Norway

www.felltech.no

Copyrights 

Copyright ©2024 Fell Technology AS. All Rights Reserved.
Fell Technology AS and Fell Marine AS are companies in Fell Group AS.

Development of products is carried out by Fell Technology AS, with licensing granted to Fell Marine AS for use.